Field testing, validation and optimization report

Ribotti, A. and Antognarelli, F. and Satta, A. and Borghini, M. and Schroeder, K. and Avella, M. and Avolio, R. and Gentile, G. and Martinez Navas, S. and Rovira Angulo, C. and Gich, M. and Salat, J. and Garcia-Ladona, E. and McCaul, M and Diamond, D. and Villalonga, J. and Confalonieri, F. and Klusek, Z. and Sagan, S. and Kowalczuk, P. and Darecki, M. and Challiss, M. and Grozdanov, A. and Navarro Hernández, C. and Fanjul Bolado, P. and Magni, P. (2016) Field testing, validation and optimization report. Project Report. Consiglio Nazionale delle Ricerche. (Unpublished)

[img]
Preview
Text
D9.2_CommonSense project.pdf

Download (13MB) | Preview

Abstract

The COMMON SENSE project has been designed and planned in order to meet the general and specific scientific and technical objectives mentioned in its Description of Work (page 77). As the overall strategy, the 11 work packages (WPs) of the work plan were grouped into 3 key phases: (1) RD basis for cost-effective sensor development , (2) Sensor development, sensor web platform and integration, and (3) Field testing. In the first two phases, partners involved in WP1 and WP2 have provided a general understanding and integrated basis for a cost effective sensors development. Within the following WPs 4 to 8 the new sensors were created and integrated into different identified platforms. During the third phase of field testing (WP9), partners have deployed precompetitive prototypes at chosen platforms (e.g. research vessels, oil platforms, buoys and submerged moorings, ocean racing yachts, drifting buoys). Starting from August 2015 (month 22; task 9.2), these platforms have allowed the partnership to test the adaptability and performance of the in-situ sensors and verify if the transmission of data is properly made, correcting deviations. In task 9.1 all stakeholders identified in WP2 have been contacted in order to agree upon a coordinated agenda for the field testing phase for each of the platforms. Field testing procedures (WP2) and deployment specificities, defined during sensor development in WPs 4 to 8, have been closely studied by all stakeholders involved in field testing activities in order for everyone to know their role, how to proceed and to provide themselves with the necessary material and equipment (e.g. transport of instruments). All this information have provided the basis for designing and coordinating field testing activities. Subsequently, the available new sensors have been tested since August 2015 till mid-October of the current year (2016) as part of task 9.2, following the indications defined in D9.1, such as the intercomparison of the new sensors with commercial ones, when possible. The availability of new sensors was quite different in time starting with the first tests in September and October 2015 on noise, nutrient and heavy metals sensors and closing with pCO2 in late September 2016. Sensors are technically fully described in the deliverables of WPs 3 to 8 and are here just mentioned where necessary. For further details, please consider those reports. Objectives and rationale The protocols prepared in D9.1 have been verified during the field testing activities of the innovative sensors on platforms. These can be summarized into 3 categories: (1) Research vessels (regular cruises); (2) Fixed platforms; (3) Ocean racing yachts. An exhaustive analysis of the different data obtained during field testing activities has been carried on in order to set possible optimization actions for prototypes design and performances. The data from each platform have been analyzed to verify limits and optimal installations or possible improvements. Finally a set of possible optimization actions has been defined. Data and observations collected during the course of field testing have been used to iteratively optimize the design and performance of the precompetitive prototypes.

Item Type: Monograph (Project Report)
Additional Information: This document may not be copied, reproduced or modified in whole or in part for any purpose without the written permission from the corresponding author. In addition to such written permission to copy, reproduce or modify this document in whole or part, an acknowledgement of the authors of the document and all applicable portions of the copyright must be clearly referenced.
Uncontrolled Keywords: marine sensor testing and validation innovative marine sensors testing activities MSFD
Subjects: 500 Scienze naturali e Matematica > 550 Scienze della Terra > 551 Geologia, Idrologia, Meteorologia > 551.4 Geomorfologia e idrosfera > 551.46 Idrosfera, Geologia sottomarina e Oceanografia (Classificare qui le acque marine, l'Idrografia, l'Oceanografia fisica; le opere interdisciplinari sulla Scienza del mare, sugli oceani e i mari)
500 Scienze naturali e Matematica > 550 Scienze della Terra > 551 Geologia, Idrologia, Meteorologia > 551.4 Geomorfologia e idrosfera > 551.46 Idrosfera, Geologia sottomarina e Oceanografia (Classificare qui le acque marine, l'Idrografia, l'Oceanografia fisica; le opere interdisciplinari sulla Scienza del mare, sugli oceani e i mari) > 551.466 Oceanografia chimica
600 Tecnologia - Scienze applicate
Depositing User: Dr Alberto Ribotti
Date Deposited: 16 Jun 2017 09:29
Last Modified: 16 Jun 2017 09:29
URI: http://eprints.bice.rm.cnr.it/id/eprint/16353

Actions (login required)

View Item View Item